رقم مجاني: +971505028848
شحن مجاني للطلبات التي تزيد عن 50 دولارًا*





Shipping this product to: CALCULATOR Change
A0245453232 / 0281010283 Mercedes‑Benz ML Class ECU Engine Control Unit.
This is an OEM Engine Control Unit (ECU) bearing the Mercedes part number A0245453232 (also shown as A 024 545 32 32) and Bosch / Bosch-type number 0281010283 (0 281 010 283).
Designed for the ML Class 2.7 CDI (diesel) – for example the W163 chassis with engine code 2.7 CDI and Bosch EDC15C6 management (CR2.14).
This unit manages crucial engine operations: fuel injection timing, turbo/boost control, sensor monitoring, emission regulation, and diagnostic protocols. It’s typically offered as a used or tested OEM unit. When replacing your ECU, you should:
Confirm the exact part number on the original unit matches A0245453232 or the Bosch number 0281010283.
Ensure your vehicle’s engine code, wiring harness, and immobilizer/immobilizer matching status align with the donor unit.
Be aware that many sellers list both “locked” and “unlocked” variants. The locked variant may require return of your original ECU, immobilizer unit, or key programming.
After installation, you may need proper diagnostics and adaptation for the ECU to fully function and communicate with other modules (e.g., immobiliser, CAN network).
| Vehicle Make | Model / Generation | Engine / Variant | ECU Part Number(s) | Notes |
|---|---|---|---|---|
| Mercedes-Benz | ML Class W163 | 2.7 CDI diesel | A0245453232 / A 024 545 32 32 / 0281010283 / 0 281 010 283 | Confirmed in listings for 2000-2006 ML 270 CDI. |
| Potentially other Mercedes models using same Bosch ECU family | – | – | Same part numbers | Cross-application may exist, but always verify compatibility |
Even when the part number matches, software version, immobilizer coding, and vehicle-specific data may differ. Many installations of this ECU require cloning or programming.
If the ECU is “locked”, you may need to supply your original ECU, keys, and/or immobilizer unit to the supplier for pre-programming.
Before purchasing, ask for photos of the unit label showing the part number, HW/SW version, and confirm the condition (no water damage, pins intact).
After installation: Clear all fault codes, test engine behavior, sensor readings (boost, injection), and ensure no “Start error” or immobilizer fault messages
نحن ملتزمون بتقديم أفضل خدمة ممكنة لكم. يُرجى قراءة سياسة الشحن أدناه للاطلاع على تفاصيل خيارات الشحن والتكاليف ومواعيد التسليم.
تتم معالجة جميع الطلبات خلال يوم أو يومين عمل. أما الطلبات المقدمة في عطلات نهاية الأسبوع أو العطلات الرسمية، فسيتم معالجتها في يوم العمل التالي. ستتلقى رقم تتبع بمجرد شحن طلبك، لتتمكن من تتبع شحنتك في كل خطوة.
يتحمل العملاء الدوليون مسؤولية دفع أي رسوم جمركية أو ضرائب قد تُطبق عند التسليم. هذه الرسوم غير مشمولة في تكلفة الشحن وتختلف باختلاف البلد.
إذا كان لديك أي أسئلة بخصوص الشحن، فلا تتردد في الاتصال بفريق خدمة العملاء لدينا على sales@automanspareparts.com .
شكرا على الاشتراك!
تم تسجيل هذا البريد الإلكتروني!