The Complete Guide: Mazda 3 Engine Control Unit (ECU) 2007–2013 | E6T62887H / LFKA-18881A
The Engine Control Unit (ECU), also known as the Powertrain Control Module (PCM) or Engine Control Module (ECM), is the brain of your Mazda 3’s engine management system. For owners of the 2007–2013 Mazda 3, understanding the unit's role, part numbers like E6T62887H and LFKA-18881A, and the replacement process is crucial for maintaining your vehicle's performance.
At AUTOMANSPAREPARTS.COM, we specialize in providing high-quality, reliable, and affordable electronic control modules. Based in France, we are a leading source for OEM ECMs, BCMs, sensors, ABS modules, fuse boxes, and TCMs, offering the cheapest rates and fast shipping to get your Mazda back on the road.
Keyword Phrases
Mazda 3 ECU 2007-2013, Mazda 3 ECM replacement, E6T62887H ECU, LFKA-18881A PCM, Mazda 3 ECU programming, 2007 Mazda 3 ECM, 2013 Mazda 3 ECU symptoms, buy Mazda 3 ECU online, OEM Mazda 3 control unit, Mazda 3 electronic module
What is the Mazda 3 ECU and Why Does it Fail?
The ECU is responsible for controlling critical engine functions, including fuel injection, ignition timing, and idle speed. When this vital component malfunctions, your Mazda 3 can experience severe performance issues.
Common Symptoms of a Faulty Mazda 3 ECU:
-
Check Engine Light (CEL): The most common indicator.
-
Engine Stalling or Misfiring: Intermittent or consistent loss of power.
-
Failure to Start: A complete loss of engine control.
-
Poor Fuel Economy: Inefficient engine mapping.
-
Shifting Problems: The ECU/PCM often manages transmission function.
The ECU in the 2007–2013 Mazda 3 is typically located near the battery in the engine bay. Failure is often caused by electrical shorts, voltage spikes, or exposure to moisture and heat over time.
Crucial Part Numbers: E6T62887H and LFKA-18881A
When replacing your Mazda 3 ECU, matching the part number is essential. The numbers E6T62887H and LFKA-18881A are OEM (Original Equipment Manufacturer) identifiers for specific variants of the Mazda 3 control unit within the 2007–2013 generation (sometimes referred to as the BK or BL chassis, depending on the specific year and market).
-
LFKA-18881A: This is the primary Mazda Part Number. It often indicates a specific revision, engine size (e.g., 2.0L or 2.3L), and transmission type (manual or automatic).
-
E6T62887H: This is typically the Manufacturer (e.g., Mitsubishi Electric) Stamping or Engineering Number.
Always match the full OEM part number on your existing unit to ensure 100% compatibility.
Does a Replacement ECU Need Programming?
Yes, a replacement Mazda 3 ECU nearly always requires programming.
When replacing the ECU in a 2007–2013 Mazda 3, the new module must be programmed with your vehicle's specific VIN (Vehicle Identification Number) and calibrated to communicate with other modules, particularly the Immobiliser/PATS (Passive Anti-Theft System) and the keys.
Automan Spare Parts Solution:
To save you time and cost, we offer pre-programmed ECU units. When you order from AUTOMANSPAREPARTS.COM, provide your VIN, and we will flash the unit with the latest manufacturer updates and calibrate it to your vehicle’s specifications.
-
If your key does NOT have an immobiliser chip (rare for this generation): The unit may be Plug and Play.
-
If your key IS chipped/PATS-equipped (most common): You may still need to perform a simple on-board key re-learn procedure or have a local technician/locksmith perform the final immobiliser/key sync.
Compatibility Tables (Example - Consult your original part number)
| Part Number | Year Range | Engine | Transmission | Chassis Code | Notes |
| LFKA-18881A | 2007–2009 | 2.0L / 2.3L | Automatic | BK/BL | Specific revisions apply. |
| E6T62887H | 2007–2009 | 2.0L / 2.3L | Automatic | BK/BL | Manufacturer stamping. |
| LFJD-18-881A | 2010–2011 | 2.0L | Manual | BL | Example of similar part. |
| LFJE-18-881B | 2012–2013 | 2.0L | Automatic | BL | Example of later part. |
Frequently Asked Questions (FAQ)
Q: Is an ECU the same as an ECM and PCM?
A: They are often used interchangeably. ECU (Engine Control Unit) and ECM (Engine Control Module) are common terms, while PCM (Powertrain Control Module) is typically used when the unit controls both the engine and the transmission. For the Mazda 3, the ECU/ECM/PCM handles engine management.
Q: How do I find my exact ECU part number?
A: The part number is stamped on the casing of your existing module. You should retrieve it directly from the car before ordering.
Q: What other electronic modules do you stock?
A: AUTOMANSPAREPARTS.COM has a huge range of OEM electronic components, including Body Control Modules (BCM), various sensors, ABS modules, fuse boxes, and Transmission Control Modules (TCM) for a wide variety of makes and models.
TLDR
The Mazda 3 ECU (2007–2013) uses part numbers like E6T62887H / LFKA-18881A and is the engine’s brain. A bad ECU causes stalling, misfires, or no-start conditions. A replacement needs programming to your VIN for the immobiliser to function. AUTOMANSPAREPARTS.COM provides pre-programmed OEM units at the cheapest rates with fast shipping from France.



