The Complete Guide: 2014–2015 Nissan Rogue Transmission Control Unit (TCU/TCM) 310F61VA1A / BEA01-100N

Welcome to www.automanparts.com, your trusted global source for high-quality, genuine OEM automotive control modules and spare parts. We pride ourselves on offering a huge range of OEM TCMs and other auto parts, positioning us as the Number 1 supplier in Tunisia with the cheapest rates and fastest shipping globally.

If you own a 2014-2015 Nissan Rogue (T32 chassis, especially Japan-built VIN J models) and are experiencing transmission issues, the Transmission Control Unit (TCU), also commonly referred to as the Transmission Control Module (TCM), is a critical component you may need to replace. This guide provides all the essential information on the specific part numbers 310F61VA1A and BEA01-100N.

Why Your Nissan Rogue TCM Might Fail

The 2014–2015 Nissan Rogue, equipped with the Continuously Variable Transmission (CVT), is known to have specific issues often linked to the transmission's control system. The TCM is the brain that manages the CVT's operation, including line pressure, clutch engagement, and pulley ratios.

Common Symptoms of a Faulty TCM (310F61VA1A):

• Delayed or Harsh Shifting/Engagement: Noticeable delay when shifting from Park (P) to Drive (D) or Reverse (R), or harsh/jerky transitions while driving.

• Limp Mode: The vehicle restricts itself to a single gear ratio to prevent further damage, often accompanied by a significant loss of power.

• Check Engine Light (CEL) or Transmission Warning Light: Diagnostic Trouble Codes (DTCs) related to transmission performance (e.g., P0700, P0706, P17F0 for judder).

• Unusual Shuddering or Jerking: Especially during acceleration, indicating poor control over the belt and pulley system.

• Stalling: Engine stalling during shifts or at a standstill due to incorrect clutch engagement parameters.

Keyword Phrases

To help you find this essential guide, here are the top ranking keyword phrases:

• 2014 Nissan Rogue TCM Replacement

• 2015 Nissan Rogue TCU Module

• Nissan Rogue 310F61VA1A TCM

• Nissan Rogue BEA01-100N TCU

• Programming Nissan Rogue TCM

• Nissan Rogue CVT Judder Fix

• Symptoms of Bad Nissan Rogue TCM 2014

• CVT Control Module 310F61VA1A Price

 Does a New TCM Need Programming? (Crucial Information)

YES, a replacement TCM for the 2014–2015 Nissan Rogue with part number 310F61VA1A will require programming/re-initialization.

Simply plugging in a new or used module will not ensure proper operation. The TCM needs to perform specific learning procedures to match the new module to your vehicle's Engine Control Unit (ECU) and the physical characteristics of your specific CVT.

• Calibration Data Write: The new TCM must have the correct CVT calibration data written to it.

• Clutch Point Learning: This procedure sets the correct engagement point for the CVT's clutches.

• Select Learning (Drive/Reverse Learning): This process helps the transmission learn the engagement points for D and R.

This programming is typically done by a dealership or a specialized independent mechanic using a professional diagnostic tool like the Nissan CONSULT-III Plus system. Failure to program the unit can result in the vehicle not moving, harsh shifting, or the transmission entering limp mode.

Compatibility Table (310F61VA1A / BEA01-100N)

Note: Always match the Manufacturer Part Number (e.g., 310F6-1VA1A) directly from your existing module for a guaranteed fit.

Frequently Asked Questions (FAQ)

Q: What is the difference between TCU and TCM?

A: They refer to the same part: Transmission Control Unit or Transmission Control Module. Nissan often uses TCM (Transmission Control Module).

Q: How do I know if my problem is the TCM or the Valve Body?

A: Both can cause similar symptoms (shudder, harsh shifting). A professional diagnostic scan (OBD-II codes) is essential. Specific codes like P17F0 often lead to the recommendation to replace the valve body or reprogram the TCM, but if communication is lost or the unit is internally failed, the TCM itself must be replaced first.

Q: Can I replace a used TCM/TCU myself?

A: While the physical replacement is straightforward for a skilled technician (usually located near the battery tray), the mandatory programming/calibration requires specialized equipment. We strongly recommend professional installation and programming.

Q: Why should I buy my TCM from Automan Spare Parts?

A: We offer genuine OEM parts like the 310F61VA1A at the cheapest rates globally and, as the Number 1 supplier in Tunisia, we ensure authenticity, quality, and fast shipping to your location worldwide.

TLDR (Too Long; Didn't Read)

The 2014-2015 Nissan Rogue TCM (310F61VA1A / BEA01-100N) is a common failure point in these CVT models, leading to symptoms like harsh shifting and limp mode. A replacement unit absolutely requires professional programming and calibration using a Nissan-compatible scan tool. Trust www.automanparts.com for the most affordable, genuine OEM TCMs with fast global shipping.