Audi Suspension Control Module 4F0907553A / 4F0910553C – Compatibility, Replacement Guide and OEM Part Numbers
The Audi Suspension Control Module, part numbers 4F0907553A, 4F0910553C, and Bosch number 4461570030, is a critical component in the adaptive air suspension system of many Audi vehicles. This module manages the ride height and damping characteristics of the suspension to ensure superior comfort and handling across varying road conditions.
If you're experiencing suspension errors, uneven ride height, or a malfunction light on your dashboard, your suspension control module may need to be replaced. This article explains compatibility, how to replace the unit, and alternative part numbers to help you get back on the road.
What is the Suspension Control Module?
The suspension control module is the brain of your Audi’s air suspension system. It processes signals from height sensors and controls the compressor, air springs, and solenoid valves to maintain ride height, comfort, and stability.
This module is typically located in the rear or under the dashboard, depending on the vehicle model. A faulty control module can lead to:
-
Warning lights on the dashboard
-
Sagging suspension on one or more sides
-
Delayed or failed suspension leveling
-
Reduced ride comfort
Compatible Part Numbers
This module is found under different part numbers due to updates, software variations, and vehicle models. The following are all known OEM numbers compatible with this unit:
-
4F0907553A
-
4F0910553C
-
4461570030 (Bosch)
-
4F0 907 553 A
-
4F0 910 553 C
These part numbers are interchangeable across various Audi models equipped with adaptive air suspension. Always verify compatibility using your VIN (Vehicle Identification Number) or existing module before purchasing.
Compatible Audi Models
The Audi suspension control module 4F0907553A / 4F0910553C fits the following models:
| Vehicle Make | Model | Year Range | Chassis Code | Notes |
|---|---|---|---|---|
| Audi | A6 | 2005–2011 | C6 (4F) | Adaptive Air Suspension Models |
| Audi | A6 Avant | 2006–2011 | C6 (4F) | With air suspension |
| Audi | A6 Allroad | 2006–2011 | C6 (4F) | Allroad models only |
| Audi | S6 | 2007–2011 | C6 (4F) | With factory air suspension |
| Audi | A8 | 2004–2009 | D3 | Confirm with VIN |
How to Replace the Suspension Control Module
Tools Required:
-
Basic socket and screwdriver set
-
VCDS (VAG-COM) or ODIS for coding
-
Access to vehicle undercarriage or footwell (depending on location)
Step-by-Step Replacement Guide:
-
Disconnect the Battery:
Safety first—always disconnect the negative terminal of the battery before handling electronic modules. -
Locate the Module:
On most Audi C6 models, the module is located beneath the dashboard or near the rear fuse box area. Consult your vehicle service manual for the exact location. -
Remove the Cover Panel:
Unscrew and carefully remove any panel covering the control module. -
Disconnect Connectors:
Gently unplug the connectors from the module. There may be safety clips or tabs to press. -
Remove the Old Module:
Unscrew the mounting bolts and remove the unit. -
Install the New Module:
Secure the replacement unit with the original bolts and reconnect all electrical connectors. -
Reconnect the Battery:
Once everything is reconnected, restore battery power. -
Perform Coding / Adaptation:
Using VCDS or ODIS, code the new module to the vehicle and calibrate the suspension system. Some modules may need adaptation values entered manually.
Do You Need to Program It?
Yes, in most cases the new suspension control module requires programming or adaptation. The vehicle must recognize the replacement unit and synchronize it with the rest of the control systems. Without proper coding, the suspension system may not function correctly, or warning lights will remain on.
Why Buy From Automan Spare Parts?
At Automan Spare Parts, we stock genuine and tested Audi modules including rare control units for suspension, transmission, ECU, and more. Our parts are sourced from trusted suppliers and are fully tested before shipping.
-
Fast worldwide shipping
-
VIN-based compatibility support
-
Wholesale and bulk availability
-
Secure checkout with customer support
Conclusion
If your Audi is showing suspension errors, replacing the suspension control module might be the key to restoring factory ride quality. The part numbers 4F0907553A, 4F0910553C, and 4461570030 are trusted OEM modules used across the Audi A6 and A8 lineup. Be sure to verify compatibility before installing, and seek professional help for proper coding.
For genuine used modules at competitive prices, visit www.automanspareparts.com today.
