BMW 103334-10 Front Hood Emblem Badge (813237505 / 10333410): Everything You Need to Know
BMW 103334-10 Front Hood Emblem Badge (813237505 / 10333410): Everything You Need to Know
Your BMW is more than just a car — it’s a statement of performance, precision, and premium quality. And nothing highlights that better than the iconic BMW front hood emblem. Whether you're restoring your vehicle’s original look or replacing a faded badge, the BMW Emblem Badge 103334-10 / 813237505 / 10333410 is the perfect OEM replacement.
This genuine emblem is now available at Automan Spare Parts — your trusted source for original BMW components shipped worldwide.
Product Overview: BMW Front Hood Emblem 813237505 / 10333410
-
Part Numbers: 103334-10 / 813237505 / 10333410
-
Placement: Front hood (bonnet)
-
Finish: Classic BMW roundel – black, blue, and white with chrome ring
-
Material: High-quality ABS with UV-resistant coating
-
Fitment: Direct OEM replacement with secure pin-fit installation
-
Diameter: ~82mm
This emblem delivers a factory-fit appearance and exceptional durability, ensuring your BMW looks as sharp as it drives.
How to Take Care of BMW Emblems While Washing Your Car
BMW emblems are built to last, but harsh chemicals, high-pressure water, or rough cleaning can cause fading or damage over time. Follow these tips to keep your emblems looking brand new:
Washing Do’s:
-
Use a soft microfiber cloth or sponge around the emblems.
-
Clean gently with pH-balanced car shampoo.
-
Rinse thoroughly to remove any soap residue.
-
Dry with a soft towel or microfiber to avoid water spots.
Washing Don’ts:
-
Avoid high-pressure washers directly aimed at emblems.
-
Do not use abrasive brushes or rough cloths on or near the badge.
-
Avoid acid-based or harsh degreasers—they can eat away at the finish.
-
Never pry or wiggle the emblem while cleaning.
Pro Tip: Waxing around the emblem occasionally will help prevent dirt buildup and UV damage.
Step-by-Step Guide: How to Replace BMW Front Hood Emblem (813237505 / 103334-10)
Replacing your BMW emblem is easy and can be done in under 5 minutes. Here's how:
What You’ll Need:
-
Plastic trim removal tool (or dental floss/fishing line)
-
Microfiber towel
-
New BMW emblem (Part 103334-10 / 813237505)
-
Optional: Two new rubber grommets if old ones are worn
Step-by-Step Instructions:
1. Prep the Surface
-
Park your car on a level surface and let the hood cool down.
-
Clean the area around the old emblem to remove any dirt or grit.
2. Remove the Old Emblem
-
Insert a plastic trim tool under the edge of the emblem and gently pry it up.
-
Alternatively, slide floss or fishing line behind the emblem and use a sawing motion to lift it.
-
Pull the emblem straight out—be careful not to scratch the paint.
3. Inspect the Grommets
-
You’ll see two small rubber grommets in the mounting holes.
-
If they’re damaged or loose, replace them for a tight fit.
4. Align the New Emblem
-
Line up the two plastic pins on the back of the new emblem with the holes in the hood.
-
Push the emblem straight in until it clicks securely into place.
5. Final Check
-
Ensure the emblem is flush with the hood and doesn’t wiggle.
-
Clean any fingerprints off the emblem and admire your refreshed front end!
BMW Emblem Sizes & Types: What’s the Difference?
BMW emblems come in a variety of sizes and styles based on model and year. Here's a quick reference:
Common Sizes:
Size | Location | Common Models |
---|---|---|
82mm | Hood, Trunk | 3 Series, 5 Series, X5, X6, Z4 |
68mm | Wheel Center Caps | Most BMW alloy wheels |
74mm | Rear Emblems | Older BMW models like E30, E34 |
Types of Emblems:
-
Classic Roundel (Blue & White) – Most common, factory-installed emblem
-
Black Line Emblems – Used on M Sport or Shadow Edition trims
-
Carbon Fiber Look – Sporty aftermarket option
-
Floating Emblems (on wheels) – BMW logo stays upright while driving
-
Adhesive-Type – Found on newer or interior parts
Buy Genuine BMW Emblems Online
You can order the BMW 103334-10 / 813237505 Front Hood Emblem now from:
- 🔗 www.automanspareparts.com
- OEM BMW parts
- Fast worldwide shipping
- Trusted by thousands of BMW owners
- Competitive wholesale prices
Conclusion
Your BMW’s emblem is more than just a logo—it’s a signature of luxury and engineering. If your badge is faded, missing, or cracked, the Genuine BMW Front Emblem 813237505 / 103334-10 is the perfect replacement.
Maintain your vehicle's iconic appearance with genuine parts from Automan Spare Parts — and give your BMW the badge of honor it deserves.