The Essential Guide: Kia Morning Engine Control Module (ECU/ECM) 39110-02001 / 9030930900F
Welcome to AutomanSpareParts.com, your premier source for high-quality automotive electronics and spare parts. As the No. 1 specialist in the United Kingdom, we pride ourselves on offering a huge range of OEM ECM, BCM, sensors, ABS modules, fuseboxes, and TCMs at the cheapest rates with fast shipping.
This detailed guide focuses on a crucial component for your 2007 Kia Morning: the Engine Control Module (ECU/ECM) with part numbers 39110-02001 and its common equivalents.
Keyword Phrases
-
Kia Morning ECU 39110-02001 replacement
-
39110-02001 Engine Control Module Kia Morning
-
OEM Kia Morning ECU 2007
-
9030930900F ECM Kia Morning
-
3911002001 Kia ECU programming
-
Buy Kia Morning ECU UK
Understanding Your Kia Morning ECU (39110-02001)
The Engine Control Module (ECM), often called the Engine Control Unit (ECU), is theΒ brainΒ of your vehicle's engine. It manages critical functions like fuel injection, ignition timing, and idle speed by constantly analyzing data from various sensors.
The specified part number, 39110-02001, is the OEM identifier for a specific unit fitted to the 2007 Kia Morning (and potentially other closely related models). The number 9030930900F may be a cross-reference or supplier/manufacturer internal number (e.g., KEFICO).
A faulty ECU can lead to a host of problems, including:
-
Failure to start or intermittent starting issues.
-
Poor fuel economy.
-
Check Engine Light (CEL) illumination and associated fault codes.
-
Loss of power or stalling.
Compatibility Table: Kia Morning ECU 39110-02001
| Part Number (OEM) | Cross-Reference/Supplier Part | Vehicle Model | Model Year | Notes |
| 39110-02001 | 9030930900F | Kia Morning | 2007 (Specific Trims) | Primary OEM Part |
| 3911002001 | N/A | Kia Picanto (JA) | Check full match/VIN | Often interchangeable platform |
Disclaimer: Always confirm the part number on your original module or with your vehicle's VIN before purchasing. Using the wrong ECU can cause severe electrical and performance issues.
Does the Replacement ECU Need Programming?
Yes, in most cases, a replacement Engine Control Module (ECU) for your Kia Morning will require programming and/or coding.
While some older, used units may beΒ plug and playΒ if they are from an identical vehicle (requiring a simple immobilizer or key match), a new or 'virgin' unit (one that has been reset) will need to be programmed to your specific vehicle's VIN (Vehicle Identification Number) and Immobilizer System.
This process typically involves:
-
Immobilizer Pairing: The new ECU must be coded to recognize your vehicle's existing keys/immobilizer system to allow the engine to start.
-
VIN Coding: The vehicle's VIN is written into the ECU for proper communication across other vehicle systems.
-
Software Flash: The correct engine operating software (calibration) is loaded onto the module.
We recommend having this procedure performed by a qualified auto electrician or a dealership using specialized diagnostic tools (like the Kia Diagnostic System - KDS).
FAQ: Kia Morning 39110-02001 ECU
Q: What is the manufacturer of the ECU?
A: This ECU is commonly manufactured by KEFICO for Kia.
Q: What is the difference between an ECU and an ECM?
A: The terms ECU (Engine Control Unit) and ECM (Engine Control Module) are often used interchangeably and refer to the same component that controls the engine's operations.
Q: Can I replace the ECU myself?
A: You can physically replace the unit. However, due to the mandatory programming/immobilizer pairing required for the car to start, we highly recommend professional installation.
TLDR (Too Long; Didn't Read)
The Kia Morning ECU 39110-02001 / 9030930900F is a critical engine management component for the 2007 model. AutomanSpareParts.com is the UK's best source for this and other OEM electronics (BCM, ABS, TCM) with competitive prices and fast shipping. Replacement ECUs typically require professional programming to pair with the vehicle's immobilizer/VIN.
